LITHIUM BATTERY CHARGER

LITHIUM BATTERY CHARGER(58.4V10A)

58.4V10A battery charger aluminum housing with positive and negative reverse protection

PRODUCT

Features

Software over voltage protection
Thermal protection
Current limiting protection
Short circuit protection
Reverse polarity protection

Applications

Energy storage system charger
Electric bicycle charger

Specification

Model：PABC-584010-16S
Max output voltage：58.4V±0.2
Output current：10A±5%　
Battery Specifications：16串
Input voltage：90-260Vac
Rated input voltage：110Vac / 220Vac
Input voltage range：90-260Vac
AC input voltage frequency：50～60 Hz
Nominal voltage：48V
High environmental temperature ambient operating：+40℃
Low environmental temperature ambient operating：-10℃
High temperature storage：+70℃
Low temperature storage： -40℃
AC wires：1.5公尺
Shell material：Aluminum
Outline dimension：L*W*H=240×120×70mm

Package transportation

There is product name, model, name of manufacturer, safety approval, serial number, User Manual and packinglist in the package box
Suit for transportation by truck, the products should be Placed in cool dry place, and loaded and unloaded carefully

PROTECTION CARACHTERISTICS

The charger output voltage does not exceed set the maximum charging voltage of the battery

Short circuit protection should be automatically recovery after remove the condition

When output wires are reversely connected to the battery the charger will not operate and will work normally when DC wires are correctly connected

The charger output current does not exceed a set battery charge current

Storage

Products should be stored in package box when it is not used. And Warehouse extreme temperatures should be -40 ~ 70 ℃, the normal temperature -20 ~ 50 ℃, and relative humidity is 5~95%. In the warehouse, there should not be harmful gas, inflammable, explosive products, and corrosive chemical products, and strong mechanical vibration, shock and strong magnetic field affection. The package box should be above ground at least 20cm height, and 50cm away from wall, thermal source, and vent. Under this requirement, product has 2 years of storage period, and should be rechecked when over 2 years

Reliability requirements

MTBF (standard, environmental temperature, load requirement) ≥50K hours;

testing condition: 25℃,full load, testing proved value

CHARGING CURVE

Application Layer